Weida
Electromechanical

13107323733
|
|
Products
chosen：
: 125mm
Describe
：
Action requirements: realize the separation of the blank and the base plate, transfer the blank from the tile trolley to the stacking trolley, and transfer the base plate from the tile trolley to the cutting machine into the base plate device. realize the transfer of billet and backing plate from the conveyor belt section of cutter to the trolley to form a 3 X5 lattice and spread, and can be placed left or right according to the actual production. Requirements: single bin with independent weighing sensor, pulse dust collector, vibration feeding motor, pneumatic feeding valve. Feeding adopts vacuum pipeline This product is a locking pin test equipment for electric ceramics. It is suitable for tension strength test of locking pin for multi-tonnage suspension products. It is suitable for gluing and maintenance of suspension series electric porcelain products. Easy to operate and large output. Manual pressure(hydraulic system), pressure maintained for 10 hours. When the pressure is 20 mpa, the structural density of the ceramics is measured The product is suitable for the voltage detection of electric porcelain products (multi-tonnage suspension, needle type products). Usage: Used for cutting or chamfering of electric porcelain products   rod type, bushing) Usage: It is used for cutting end face and grinding round end face or chamfer of large This product is a suspension gluing machine, suitable for multi-tonnage suspension product gluing. Suitable for glazing of ceramic sleeve products below 35KV, simple operation and smooth glaze surface It is suitable for small and medium-sized products to wash billets automatically before glazing. Easy to operate and large output It is suitable for glazing needle series electric porcelain. Large output, high efficiency, smooth glaze. Simple operation and convenient maintenance This product is a suspension glazing machine for electric porcelain products ith uniform glaze surface and high output. It is suitable for glazing multi-tonnage suspension products It is suitable for glazing bar products. Fixed with jacket. High efficiency, smooth glaze. Simple operation and convenient maintenance Applicable to 57 series products, fixed by jacket. High efficiency, smooth glaze. Simple operation and convenient maintenance This product is the industry's hanging product punching equipment, suitable for multi-tonnage hanging product stamping. Suitable for the production of casing products below 35 kv. Once shaping, easy to operate, high efficiency. The equipment can be installed flexibly Usage: Used for repairing electric porcelain products Usage: Used for repairing electric porcelain products. This product is ceramic industry, which can prevent slurry precipitation during slurry storage and achieve the purpose of uniform slurry transportation and filtration The main machine for the first time in smelting industry press molding ceramic mud machine, cake was stale, trimming return can also be used for refining mud forming, saggar mud, with stable performance, high yield, easy maintenance etc.. The series is used for slurry dewatering. After dewatering, the slurry with moisture content of 18-30% can be obtained. It is the main dewatering equipment for domestic ceramics, industrial ceramics, chemical industry and other industrial slurries The series of ball mills are mainly used for wet ball milling of ceramic raw materials, especially for building ceramics, household ceramics, electric ceramics, chemical industry, mining and ball milling of glazes of different colors.
 
Corporate
news

Industry
information
Contact
information
TEL：0731-57779595
FAX：0731-57779395
Add：71 Hehua Middle Road, Tianyi demonstration area, Yisuhe, Xiangtan County, Hunan Province, China

Mobile：+86 13107323733
mailbox：xtweida@163.com
Wechat scanning